Supported Hardware
This is the hardware landing page! Welcome in. To navigate through this (large) subsection, use the sidebar on the left.
These pages show information on certain modifications to hardware, and certain ELRS specific hardware. More and more manufacturers are coming up with their own take of the ExpressLRS Hardware and the list keeps growing.
At the time of writing, here are the ExpressLRS-supported Transmitter Modules and Receivers, along with a few Flight Controllers and AIO boards.
2.4GHz Transmitter modules¶
Happymodel ES24Tx¶
NamimnoRC Flash¶
Axis Thor TX¶
Includes Color TFT display, built in motion sensor and thermally controlled fan
BetaFPV Nano 2.4GHz¶
Jumper AION Nano TX¶
Vantac Lite TX¶
Ghost TX¶
Note: STLink first time flash, irreversible
Siyi FM30¶
Max output power: 100mW default, 250mW with UNLOCK_HIGHER_POWER
2.4GHz Receivers¶
To help find the right receiver for your needs, see the Receiver Selection page.
Happymodel EP1 & EP2¶
Happymodel PP¶
NamimnoRC Flash¶
Axis Thor RX¶
BetaFPV Nano 2.4GHz¶
MatekSys 2.4GHz Receivers¶
Jumper AION Mini 2.4GHz Recievers¶
Vantac RX¶
Ghost Atto Receivers¶
Note: STLink first time flash, irreversible
Siyi FR Mini¶
Max telemetry power: 100mW default, 250mW with UNLOCK_HIGHER_POWER
Note: only guaranteed to work on the v3.0 of the receiver
900Mhz Transmitter Modules¶
Frsky R9M (inc. Lite & Lite Pro)¶
Max output power: 250mW default, 1W with UNLOCK_HIGHER_POWER
Happymodel ES900TX¶
Max output power: 250mW default, 1W with UNLOCK_HIGHER_POWER
NamimnoRC Voyager¶
BetaFPV Nano 900Mhz¶
900Mhz Receivers¶
Frsky R9 Receivers¶
- R9MM
- R9 Mini
- R9MX
- R9 Slim
- R9 Slim+
Jumper R9 Mini¶
Happymodel ES900RX¶
NamimnoRC Voyager¶
BetaFPV Nano 900Mhz¶
Flight Controllers with onboard ExpressLRS Receivers¶
Happymodel ELRS F4 2G4 AIO¶
Note: SPI-based receiver. Doesn't need the ExpressLRS Configurator for updates. See this page for more info.
Happymodel CrazyF4 ELRS AIO 900Mhz¶
Note: Receiver firmware can be updated using the ES915/868RX methods.
BetaFPV F4 1S 12A AIO¶
Note: Receiver firmware can be updated using the Beta FPV Nano 2.4GHz methods
SPRacing H7RF¶
Note: SPI-based receiver. Doesn't need the ExpressLRS Configurator for updates. See this page for more info.
DIY TX Modules¶
See this page here
DIY Receivers¶
See this page here