Supported Hardware
Welcome to the hardware landing page. To navigate through this subsection, use the left sidebar.
These pages show information on certain modifications to hardware, and certain ELRS specific hardware. More and more manufacturers are coming up with their own take of the ExpressLRS Hardware and the list keeps growing.
At the time of writing, here are the ExpressLRS-supported Transmitters and Receivers, along with a few Flight Controllers and AIO boards.
2.4GHz Transmitters¶
2.4GHz Transmitters
Axisflying Thor TX¶
Includes Color TFT display, built in motion sensor and thermally controlled fan
BetaFPV Nano 2.4GHz¶
Ghost TX¶
STLink first time flash, irreversible
Happymodel ES24Tx¶
Jumper AION Nano TX¶
NamimnoRC Flash¶
Siyi FM30¶
Max output power: 100mW default, 250mW with UNLOCK_HIGHER_POWER
Vantac Lite TX¶
2.4GHz Receivers¶
2.4GHz Receivers
To help find the right receiver for your needs, see the Receiver Selection page.
Axisflying Thor RX¶
BetaFPV Nano 2.4GHz¶
Ghost Atto Receivers¶
STLink first time flash, irreversible
Happymodel EP1 & EP2¶
Happymodel PP¶
Jumper AION Mini 2.4GHz Recievers¶
MatekSys 2.4GHz Receivers¶
NamimnoRC Flash¶
Siyi FR Mini¶
Max telemetry power: 100mW default, 250mW with UNLOCK_HIGHER_POWER
only guaranteed to work on the v3.0 of the receiver
Vantac RX¶
900Mhz Transmitters¶
900Mhz Transmitters
BetaFPV Nano 900Mhz¶
Frsky R9M (inc. Lite & Lite Pro)¶
Max output power: 250mW default, 1W with UNLOCK_HIGHER_POWER
Happymodel ES900TX¶
Max output power: 250mW default, 1W with UNLOCK_HIGHER_POWER
NamimnoRC Voyager¶
900Mhz Receivers¶
900Mhz Receivers
BetaFPV Nano 900Mhz¶
Frsky R9 Receivers¶
- R9MM
- R9 Mini
- R9MX
- R9 Slim
-
R9 Slim+
Happymodel ES900RX¶
Jumper R9 Mini¶
NamimnoRC Voyager¶
Flight Controllers with onboard ExpressLRS Receivers¶
Flight Controllers with onboard ExpressLRS Receivers
BetaFPV F4 1S 12A AIO¶
Receiver firmware can be updated using the Beta FPV Nano 2.4GHz methods
Happymodel ELRS F4 2G4 AIO¶
SPI-based receiver. Doesn't need the ExpressLRS Configurator for updates. See this page for more info.
Happymodel CrazyF4 ELRS AIO 900Mhz¶
Receiver firmware can be updated using the ES915/868RX methods.
SPRacing H7RF¶
SPI-based receiver. Doesn't need the ExpressLRS Configurator for updates. See this page for more info.
DIY Transmitters¶
DIY Transmitters
For DIY transmitters, See this page here.
DIY Receivers¶
DIY Receivers
For DIY receivers, See this page here.