Skip to content

DIY 2400TX

Setup-Banner

Flashing via USB/UART (ESP32)

  • Targets:
    • DIY_2400_TX_ESP32_SX1280_E28_via_UART
    • DIY_2400_TX_ESP32_SX1280_LORA1280F27_via_UART
    • DIY_2400_TX_ESP32_SX1280_Mini_via_UART

Plug the ESP32 of the DIY TX into the USB of your computer. Then select the correct target given the RF chip you chose and press Build & Flash. Further updates can be performed by building and flashing the .bin file to the external module using OpenTX.